POROUS CERAMICS ACCESSORIES

MODEL 980 EPOXY KITS
Soilmoisture's Model 0980 Epoxy K:

it is a clean, time proven, 2-part, semi-flexible inert epoxy joining material in kit form. A superb combination (Furane-type epoxy and hardener) that, when mixed together, is capable of joining materials of dissimilar coefficients of expansion. The epoxy makes an excellent seal for porous ceramics and such dissimilar materials as PVC pipe, neoprenes, and Butyl elastomers. Since this epoxy process contains no activators and uses nonvolatile organic components, it provides contaminate-free joints and seals. In addition the epoxy is virtually inert to most all bases, acids, and salts making it perfect for sensitive research and tough operating environments. It is not recommended for use with lucite. Each kit contains equal amounts of epoxy and hardener.

0980V004 04oz Kit (Epoxy & Hardener)

0980V016 16oz Kit (Epoxy & Hardener)

0980V023 32oz Kit (Epoxy & Hardener)

MODEL MRT SERIES NEOPRENE & BUTYL TUBING
The MRT series is a selection of black opaque Neoprene or Butyl tubing you may find helpful for your specific project. Since Neoprene and Butyl are hardy and stretchable synthetic rubbers they make good primary flexible joints, they also act as a link to join the more rigid parts and tubing sections sometimes of fairly dissimilar size. In general, a Butyl product has fewer ingredients and amendments and is considered a "cleaner" product.

MRT001 1/16" I.D. X 1/16" wall, per/ft Neoprene

MRT003 3/16" I.D. X 1/8" wall, per/ft Neoprene

MRT004 1/4" I.D. X 3/16" wall, per/ft Neoprene

MRT005 1/16" I.D. X 1/8" wall, per/ft Neoprene

MRT007 1/8" I.D. X 1/8" wall, per/ft Neoprene

MRT015 3/16" I.D. X 1/8" wall, per/ft Butyl

MODEL MYT SERIES NYLON TUBING
The MYT series is a selection of translucent white Nylon tubing available to transport solutions, water, and air, to and from ceramics parts and assemblies. The tough tubing is perfect for field and commercial use where elevated pressures and vacuums may be applied. It should be remembered that Nylon will absorb a small water content over time lengthening the tubing; of course the reverse is true once wetted.

MYT001 3/32" I.D. X 1/64" wall, per/ft

MYT003 1/8" I.D. X 1/64" wall, per/ft

MYT009 1/16" I.D. X 1/16" wall, per/ft

MODEL MBT SERIES COPPER TUBING
Used for evacuation of soil water samples which utilize our porous ceramic cups and plates. MBT013L50 1/4" O.D. x .030" wall, 50 ft. roll

MODEL MRF BUTYL SHEETING
Used for backing on our porous ceramic plates and as rubber boots in our porous ceramic cup assemblies.

MRF 002-003 36'' wide sold by linear foot