Part Number: 7005L02 Part Name: BLUETOOTH MODULE

Our new Bluetooth module for Trase systems allows you to wirelessly connect between a Trase and any other Bluetooth enabled desktop, laptop or Palm PDA. This Class 1 Bluetooth device connects your Trase unit wirelessly to your host device either in the field or lab. 4 AA batteries provide power for days of unattended use even where there no power available on site. You can easily see if your Trase is connected to, and communicating with, the Bluetooth module, and that power is on, simply look in the window. This new module supports all Bluetooth wireless enabled Palm devices running Trase Term applications or with any Bluetooth enabled Laptop or Desktop PC's running WinTrase Software. Enjoy the freedom and ease of working in a cable free environment. Stop being forced to buy yet another adapter so that your Trase system will communicate with the newest computer manufacturers latest I/O port arrangement. Solve the problem permanently by making life easy and eliminating it all together. Begin using the new Bluetooth Module from your Trase to the digital world outside. Small Size 3.75" (9.53cm) high x 2.65" (6.73cm) wide x 1.75 (4.45cm) thick Low Power on average less than 20 mA draw. No Special Keys or Coding no specialized pairing codes or access routines High Power and Sensitivity maximum 6db out and high sensitivity to incomming bluetooth signals Conformance means meeting industrial standard EIA-232-E for serial data communication -passthrough devices. Easy Connections - module has Sub-D 9 pin connector, 2 ft. RS-232 Cable with easy access on and off switch located at the bottom of the module Trase System Compatible works with all Trase systems (for older models you will need a DB-25 to Sub-D9 adapter)

Part Number: 7010GSMD Part Name: GPRS/GSM Wireless Modem

The 7010 Wireless Modems configured and supplied in two varities. The "D" version for domestic users and the "F" model for our foreign customers. The modem is perfact for remote locations where there may not be dedicated land line access to phones but where an authorized carrier such as T-Mobile has local GPRS/GSM wireless coverage. For operation you simply need to provide a SIM card purchased from your local wireless network provider. ( GPRS/GSM Network must provide a consistant and reliable CSD protocol -Circuit Switched Data signal sequence for interconnecting digital non-voice devices). This is the prefect remote access accessory for Trase Systems in the field. A practical, inexpensive solution to running a high cost dedicated phone line to a remote location. AT command set is automaticllly configured to provide consistant and reliable connections. No difficult key switches or byte tweeking we've don it all for you. Add this accessory to an existing Trase unit to provide remote access or have us build a full Trase system with this included. Either way you end up with nearly world wide coverage for your Trase unit from almost any point on the planet. SMALL SIZE 2.30" wide (5.842cm) x 3.75" long (9.53cm) x 1.00" thick (2.54cm) Comes Complete - comes with antenna, power adapter (110VAC) and serial cable. Two Models - 7010GSMD a domestic model with 110 VAC power supply and the 7010GSMF for 220 VAC use. Meets Hayes and International Standards - a modem that meets all Hayes and international standard for GPRS / GSM digital transmissions. Configured for immediate use with TRASE systems we've done all the testing and configuration of AT commands etc. you just plug and play. Preferred Carrier T-Mobile has shown ability to reliably provide CSD signal sequences

Part Number: 2008 Part Name: Electric Pressure/Vacuum Pump

Electric Pressure Vacuum Pump is battery-operated combination pump, with 2 batteries for total power of 24 AmpHours. With both pressure (Pressure 0-100 psi; with max.presure setting) and vacuum (0-100 cb) gauges. Electric Pressure/Vacuum Pump comes with 2 each 3-foot long hoses, inline filter, and 110V Battery Charger, encased in a portable Pelikan case.

Part Number: 1725D22 Part Name: Special Sampling Plate, Assy with Handle

Our new large scale (22-inch diameter) vacuum plate provides a tremendous amount of surface space to control suction or sampling on a big scale. You can place your samples or growing plants on one of these large plates and induce the matric suction required up to 1 bar of suction. Forget the mess of sand tables and other crude devices, this is a complete, "system level" vacuum plate assembly, which is also extremely easy to use, and install. Simply wet up the samples on the plate, tie into a vacuum reservoir and pull the suction level required - it couldn't be easier. The extractor plate comes with 5 removable legs and a hose connector on the bottom of the plate. If you're doing any kind of vacuum work, you should seriously consider this new 1725D22 plate.

Part Number: 3115P40G4 Part Name: Compact Plant Water Status Console

Plant water status console, this compact field model, complete with 5" vessel and g4 specimen holder, will operate with a pressure range upto 40 bar. It is equipped with a quick-connect coupling to the air supply bottle which is included in the set. Ideal for use in the field because of its compact size (17" x 13" x 7" ) and watertight housing.